BMS ICP/DED Device Basic 1.0 Released

BMS ICP/DED Device Basic 1.0 released

through apple appstore & google play store.

You can get it for free through 2016/10/17 ~ 2016/11/06.

This app is no longer available.

There will be pro version of this app with some feature added.

Thank you for your support.

Apple app store Download Link

https://itunes.apple.com/us/app/bms-icp-ded-device-basic/id1166160778?l=ko&ls=1&mt=8#

Google play store Download Link

https://play.google.com/store/apps/details?id=com.hopi.icpdevicebasic

You need BMS Server 1.0ex for this app

https://www.dropbox.com/s/ev9kg8788kt088k/BMS_ICP_SERVER_10ex.zip?dl=0

//////////////////////////////////////////////////////////////////////////////////////////

SECTION 1. Install & How to use

1. Run ICP/DED Device App

2. Run BMS Server

   Important! Run the program as admistrative mode at first.

   It will ask you that do you want to add the rules for this program.

   Select 'yes' for UDP communication for this program.

   Otherwise, you will not receive data or send any data through this program.

3. Check the ICP/DED app that display the server version.

   If you didn't see this message, you can't receive or send any data.

4. You cannot press any key until BMS Simulation launched.

   The 'BMS server' means BMS Simulation. Not the BMS Server Program.

5. After that, you are good to go.

   Just run the BMS simulator and enjoy.

   If you didn't see any message or can't send button data, see section 2.

//////////////////////////////////////////////////////////////////////////////////////////

SECTION 2. Trouble Shooting

1. I can't see 'SERVER CONNECTED' message

   - Make sure you run the BMS Server at administrative privilage at first time.

   - Make sure your device connected wifi that connected to your computer.

2. From time to time, the display didn't get the DED data.

   - BMS Server uses UDP data, so it didn't care about data received.

   - Sometimes, stand your device will help this issue.

3. Button not work or button input abnormally.

   - ICP BUtton mapping must use default. (ex. COM1 for 'F1' and COM2 for 'F2')

   - Your BMS Simulation window must be focused when the button pressed.

4. When launch the BMS Server program, I got thd 'side-by-side' error.

   - You need to install MSVC 2013 distribution kit for this program.

   - You can download this kit from below link.

   https://www.microsoft.com/en-us/download/details.aspx?id=40784

//////////////////////////////////////////////////////////////////////////////////////////

SECTION 3. Feature

THE SERVER

- There's no need input any ip address for this app

- It can support multiple network Interface Card (NIC)

- This server uses UDP port 9000 through 9010 (automatically)

THE CLIENT (App)

- Support haptics

- It will not go to sleep mode when use this app

- Support full 3d animation

(HUD brightness knob will not function at this moment)

Thank you