티스토리 뷰

BMS ICP/DED Pro & BMS DEVICE Pro Released!

(for Anroid and iOS)



You must download BMS Server for these app.

BMS Server 1.1ex Download


Instruction.

Section 1

BMS Server Program

1. At first time, you must run this server program with administrative privilege.

   It will ask you add rule for UDP for this app.. select OK.

   


2. From the 'Firewall' menu, make sure 'Add Rule' checked.

   


3. From now on, server will wait for the BMS Simulation.

   


4. After BMS simulation launched, program detects it and will initialize.

   for the connection.

   


Section 2

1. ICP/DED

   1) run ICP/DED app (android or iOS or both)

      


   2) You cannot do anything without server connection

      Make sure turn on wi-fi and check that mobile device connected to same     

      router that used by computer

      


   3) Start BMS Server

      You must see the 'server connected' message. Otherwise, go to section 1.

      


   3) If the BMS simulation launched, the display go to blank temporarily.

      After simulation launched, you can see DED data.


   4) You can switch to night mode by drag Bright knob to down position or up 

      position for the day mode

      


2. Device pro (rwr & warning panel)

   1) run device app (android or iOS or both)

     


  2) You cannot do anything without server connection

      Make sure turn on wi-fi and check that mobile device connected to same     

      router that used by computer

      


   3) Start BMS Server

      You must see the 'server connected' message. Otherwise, go to section 1.

      


   3) If the BMS simulation launched, the display go to blank temporarily.

      Swipe the display from left edge to right or right edge to left for change RWR

      


   4) You can see the RWR display and data if the plane powered up. 

      (And RWR powered on)

      


Section 3

Key Binding

* Currently, there is no function that could change key input for this app *

There will be added some feature like changing key binding for this app at later version.


1. input key list

   1) ICP Key Binding

      


   2) RWR Buttons Key Binding      

      


   3) Warning Light Panel Key Binding

      


2. How to change BMS Key Binding 

   1) go to setup page

 

   2) From there select Controllers


   3) Find each section (ICP / TWA / TWP, etc)


   4) Select item to change and press key (see keyboard binding list above)

       or, press mobile app buttons (BMS server must running and mobile app 

       connected before continue)


SECTION 4

Troubleshooting


1) I can't connect to my computer!

   - go to section 1 and make sure udp rule added for the BMS Server program.

   - make sure you turn on you mobile device's wi-fi

   - make sure your mobile device connected same wi-fi that used by BMS program


2) The app connected ok, (see the display data) but when I press any button, 

   there's no responding

   - You must set exactly same key binding that described in the section 3

   - If you cannot see TWA or TWP or ICP section at the controller page, you must 

     load different key setup.


Special thanks to the S.Korea naver wolfpacks team.

Feel free to contact me via e-mail if you have trouble to use this app.

Merry x-mas and happy new year!







댓글
댓글쓰기 폼
공지사항
Total
16,967
Today
11
Yesterday
23
링크
TAG
more
«   2018/11   »
        1 2 3
4 5 6 7 8 9 10
11 12 13 14 15 16 17
18 19 20 21 22 23 24
25 26 27 28 29 30  
글 보관함